歡迎訪問濟南金昊化工有限公司網站!
全國咨詢熱線:13869119097

聯系我們

濟南金昊化工有限公司

電話:13869119097

傳真:0531-88529097

售后:0531-88529097

地址:濟南市天橋區桑梓店鎮化工市場南區

新聞中心

所在位置:首頁 > 新聞中心 

在SDS - PAGE中,過硫酸銨的各項數據處理及使用!

發布來源:http://www.jsyjs.net    更新時間:2022-05-10 點擊數:559

在SDS - PAGE中,配膠時需加入TEMED和過硫酸銨,它的作用是什么?但將凝膠液加入在制膠器后需在其上慢慢加入一層乙醇或異丙醇或水

In SDS - page, TEMED and ammonium persulfate need to be added when preparing glue. What is its function? However, after adding the gel solution to the glue maker, slowly add a layer of ethanol, isopropanol or water onto it
聚丙烯酰胺(PAGE)是由丙烯酰胺聚合形成的高分子 這個聚合反應是自由基聚合,需要有引發劑產生自由基將反應引發 過硫酸銨就是引發劑,而TEMED可以催化過硫酸銨產生自由基,從而加速丙烯酰胺凝膠的聚合:
Polyacrylamide (page) is a polymer formed by polymerization of acrylamide. The polymerization reaction is free radical polymerization, which requires an initiator to generate free radicals. The initiator is ammonium persulfate. TEMED can catalyze ammonium persulfate to generate free radicals, thus accelerating the polymerization of acrylamide gel:
過硫酸鈉是一種無機化合物,化學式為Na2S2O8。它是過二硫酸的鈉鹽,是一種強氧化劑。它幾乎不潮解,可以長時間儲存。過硫酸鈉可以通過硫酸氫鈉的電解氧化制得:2 NaHSO4 → Na2S2O8 + H2氧化在鉑陽極發生。過硫酸鈉的標準氧化還原電位為2.1 V,高于過氧化氫(1.8 V),低于臭氧(2.2 V)。原位生成的硫酸根自由基(sulfate radical)的標準電極電勢為2.7 V。
Sodium persulfate is an inorganic compound with the chemical formula Na2S2O8. It is the sodium salt of persulfate and a strong oxidant. It hardly deliquesces and can be stored for a long time. Sodium persulfate can be prepared by electrolytic oxidation of sodium bisulfate: 2 NaHSO4 → Na2S2O8 + H2 oxidation occurs at platinum anode. The standard redox potential of sodium persulfate is 2.1 V, higher than hydrogen peroxide (1.8 V) and lower than ozone (2.2 V). The standard electrode potential of the sulfate radical generated in situ is 2.7 v.
過硫酸銨、過硫酸鈉、過硫酸鉀都是過氧化物,我知道的一個用途,是用作合成以水為溶劑/介質的部分高聚物(塑料、樹脂)的引發劑。
Ammonium persulfate, sodium persulfate and potassium persulfate are peroxides. One use I know is to be used as initiators for the synthesis of some polymers (plastics and resins) with water as solvent / medium.
引發劑的用量是非常少的,通常只有樹脂量的1.5%左右。這些東西是分級出售的、根據純度來分的,工業級的、化學級的、分析純,是不一樣的,具體出廠不清楚。
The amount of initiator is very small, usually only about 1.5% of the amount of resin. These things are sold at different levels according to purity, industrial grade, chemical grade and analytical grade. The prices are different, and the specific ex factory prices are not clear.
過硫酸銨、過硫酸鈉、過硫酸鉀都是過氧化物,我知道的一個用途,是用作合成以水為溶劑/介質的部分高聚物(塑料、樹脂)的引發劑。引發劑的用量是非常少的,通常只有樹脂量的1.5%左右。
Ammonium persulfate, sodium persulfate and potassium persulfate are peroxides. One use I know is to be used as initiators for the synthesis of some polymers (plastics and resins) with water as solvent / medium. The amount of initiator is very small, usually only about 1.5% of the amount of resin.
這些東西是分級出售的、根據純度來分的,工業級的、化學級的、分析純,是不一樣的,具體出廠不清楚。
These things are sold at different levels according to purity, industrial grade, chemical grade and analytical grade. The prices are different, and the specific ex factory prices are not clear.
儲存:過硫酸銨,但由于能釋放氧而有助燃作用,儲存時,必須存放在干燥、密閉的容器中,避免陽光直射、勿近熱源。不可同有機物和鐵銹、少量金屬等還原性物質接觸,以防引起過硫酸銨的分解、爆炸。
Storage: ammonium persulfate, which can release oxygen and has combustion supporting effect, must be stored in a dry and closed container to avoid direct sunlight and close to the heat source. Do not contact with organic matter, rust, a small amount of metal and other reducing substances to prevent the decomposition and explosion of ammonium persulfate.
由于潮濕的過硫酸銨粉末及其水溶液有漂白和輕微的腐蝕作用,因此使用過程中因避免眼睛、皮膚和衣物直接與其接觸。
氫氧化鉀
Because the wet ammonium persulfate powder and its aqueous solution have bleaching and slight corrosion, it is necessary to avoid direct contact with eyes, skin and clothes during use.
用途:
Purpose:
聚合:乳膠或丙烯酸單體聚合液、醋酸乙燃、氯乙烯等產品的引發劑,同時也是苯乙烯丙烯腈、丁二烯等膠體發生共聚作用的引發劑。
Polymerization: it is the initiator of latex or acrylic monomer polymerization solution, ethyl acetate, vinyl chloride and other products. It is also the initiator of copolymerization of styrene, acrylonitrile, butadiene and other colloids.
金屬處理:金屬表面的處理(例如在半導體制造業:印刷電路的清潔和蝕刻)。銅和鋁表面的活化。
Metal treatment: treatment of metal surfaces (e.g. in semiconductor manufacturing: cleaning and etching of printed circuits). Activation of copper and aluminum surfaces.
化妝品:漂白配方的主要成分。
Cosmetics: the main component of bleaching formula.
紡織品:脫漿劑和漂白劑——特別為低溫漂白。
Textiles: desizing agent and bleaching agent - especially low temperature bleaching.
其他:化學合成:水處理(凈化);劑;廢氣處理,有害物質氧化降解(例如汞);紙張(淀粉改性,為低溫漂白特殊再制漿)。
Others: chemical synthesis: water treatment (purification); disinfectant; Waste gas treatment, oxidative degradation of hazardous substances (e.g. mercury); Paper (starch modified, special re pulping for low-temperature bleaching).
濟南金昊化工有限公司從事氫氧化鉀,過硫酸銨已經多年,我們堅持真誠服務客戶,更多的內容請關注我們的網站:http://www.jsyjs.net
Jinan Jinhao Chemical Co., Ltd. has been engaged in potassium hydroxide and ammonium persulfate for many years. We insist on sincere service to customers. For more information, please pay attention to our website: http://www.jsyjs.net

聯系我們

濟南金昊化工有限公司

電話:13869119097

傳真:0531-88529097

售后:0531-88529097

地址:濟南市天橋區桑梓店鎮化工市場南區

掃描二維碼,關注我們

13869119097

全國客戶服務熱線

濟南金昊化工有限公司

備案號:魯ICP備19046505號-2